Leaking water in the bathroom is a hassle. It not only causes a lot of inconvenience to our lives, but also affects the relationship with our neighbors downstairs. Toilet leakage is generally divided into floor leakage and upper and lower water pipe leakage. There are different solutions for different causes of leakage. The following is a brief introduction to the maintenance method of bathroom leakage .
Toilet leak repair method-ground leak repair
1. Determine if the ground is leaking
The method of repairing the toilet water leakage must find the correct reason to deal with the water leakage problem correctly. If it is ground leakage, the detection method is very simple. First, keep the ground clean and do not touch the water. If there is no water leakage downstairs, let the ground contact with the water. If there is a water leakage downstairs, it means that the ground is leaking. Water leakage on the ground may be due to inadequate waterproofing measures or gaps in the base surface.
2. Maintenance method for toilet floor leakage
a. After confirming that the ground is leaking, the location of the leak should be determined. At this time, you can go downstairs to check the location of the leak. Be sure to clean the ground of oil, water and dust before maintenance, and keep the ground dry.
b. If using caulking agent for maintenance, a small groove should be dug in the brick joint of the bathroom floor leakage position, and then spray some waterproofing agent around the root of the water pipe, ceramic tile, ceramic tile joint, wall joint, etc At this time, pay attention to be uniform when spraying.
c. After 90% of the waterproofing agent has dried, fill the small grooves that were previously marked for repair. For locations such as floor drains, water pipes, and wall joints, joint grout should be used to strengthen the treatment to make the waterproof effect better. Plastic steel mud can also be used as the waterproof edge, but its position should not get wet within 24 hours after maintenance.
Toilet leak repair method-leak repair of upper and lower water pipes
1. Determine whether the water leaks from the upper and lower water pipes
The method of detecting the water leakage of the upper and lower water pipes of the bathroom will be more troublesome. First, turn off the main water inlet of the home, and then turn on all the faucets in the home, so that the water in the water pipe can be drained. After the water in the water pipe is drained, it can't be used for 6 hours. After that, open the main water gate in the house, but you can't turn on the faucet. At this time, you can observe whether the water leaking downstairs is dripping. There is no leaking sewer.
2. Leakage maintenance method of toilet upper and lower water pipes
For the leakage of the upper and lower water pipes, the upper and lower water pipes at the leaking position must be removed, and then the new upper and lower water pipes are replaced, and then the maintenance at that position is just fine.
Summary of the article: The above is the introduction to the repair method of toilet leakage . In order to avoid this problem, when the bathroom is renovated and designed, the waterproof measures must be done, and high-quality water pipes should be selected for installation. In case of water leakage in the bathroom, it is necessary to find out the correct reason for the cause.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
Ultraviolet Uvc Light,Germicidal Uvc Lamps ,Replacement Uvc Lamp,Uvc Germicidal Light
Foshan Kingrate Optoelectronic Technology Co., Ltd. , https://www.kingrateuv.com