Toilets are necessary for people's daily life. In the face of dazzling products, what are the methods and techniques for toilet selection ? Where do we need to pay attention to in the process of installing toilets? Next, Xiaobian will introduce them to you. Take a look at toilet selection tips and installation points.
First, toilet selection skills
1, weight
In general, the heavier the toilet, the better its quality. The weight of a good toilet is about 100 pounds. We can judge the quality of the toilet by weighing the weight of the tank lid.
2. Drain hole
Today, many toilets have 2-3 drain holes, but too many drain holes can affect the toilet's momentum. When we buy a toilet, it is best to choose a toilet with a drain hole.
3, pit distance
Before we buy the toilet, we must measure the distance from the outlet to the wall behind the tank. According to the distance, select a toilet with a different pit distance. When we buy the toilet, we must pay attention to the drainage way of the bathroom outlet.
4, caliber
Generally, the squeezing line of the toilet is relatively large and the surface has glazing. Its drainage capacity is relatively good. We can put our hands into the toilet mouth. The toilet mouth can accommodate the size of a palm-sized caliber the best.
5, water tank
When we buy the toilet, we also need to check the water tank. We can check whether the water tank leaks by adding blue ink to the tank. If blue water flows out of the toilet, the toilet will leak.
6, the surface
When we buy a toilet, we can touch the surface of the toilet by hand. If the texture is delicate, then it means that the quality of the toilet is better. We also need to look at whether the surface of the toilet will have bubbles, small holes and other issues. Gently tap the toilet with your hand. If the sound is husky, the quality of the toilet is not good.
Second, the toilet installation points
1, check the product
Before we install the toilet, we must check out the products faced by the merchants to check out the products. Check the products for defects, such as chromatic aberration and bruising.
2, check to adjust the ground level
We must conduct a thorough inspection of the bathroom before starting installation. For example, where the toilet is installed, whether its floor is horizontal or not, sewage pipes are suitable for mud and other debris, and the toilet's water outlet is preferably about 2-5mm above the ground.
3, inspection of water tank accessories
We can drain the tap water for a few minutes to ensure that the water pipe is clean. After installing the angle valve and hose, check the water inlet and seal of the water valve by turning on the water supply. After the toilet has been fully installed, the flush effect of the toilet should be tested.
Xiao Bian summary: on the toilet selection techniques and installation points Xiao Bian introduced here, I hope that after reading this article, can provide reference and help for everyone.
Toilet selection
Shower Faucet System,Concealed Bath Shower,In-Wall Black Shower Faucet
Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jmjenorsanitary.com