Sun Industrial Co., Ltd., which produces membrane structures such as tents (Setagaya City, Tokyo, Japan), released on September 3 the use of resin and aluminum composite materials for substrates, which reduced the weight of solar panels by about half. T-Light Solar ". It was jointly developed with Handan Plastics Industrial Co., Ltd. (Gifu City, Gifu Prefecture).
The base material uses a composite of resin and aluminum and weighs approximately one-half of the original T-Light Solar. (Source: Sun Industry Company)
Solar panels so far use glass substrates and are reinforced with aluminum frames. This time, the panels were made of a base material made by bonding thin aluminum sheets to a honeycomb structure resin that was arranged in a regular hexagonal prism shape.
A polysilicon solar cell and a protective film were attached to the surface of the aluminum plate of this composite material to form a solar cell panel. The company said that since the aluminum plate serves as both the substrate and the frame, there is no need to use a frame.
Since the weight of the substrate is reduced and no frame is required, the weight of the polysilicon solar panel is reduced from about 12 to 15 kg per square meter to about 7 kg, which is reduced by about 41 to 53%.
Sun Industry also stated that compared with existing solar panels, the new panels have not only excellent rigidity, but also fewer restrictions on the installation position, so the load and restrictions on the platform can be reduced accordingly. As a result, the weight of the platform can be reduced and the cost can be reduced.
Due to the reduced weight of the panel, roofs that could not be installed because they did not meet the crystalline silicon panel load conditions were also available.
Sun Industry estimates that the installation of such roofs, such as factory-used slate roofs (stone-laminate roofs), will increase.
T-Light Solar's maximum output power is 147W, the size is 1300mm×1000mm, the thickness is 14mm, and the weight is about 9.1kg. Sales will begin officially in 2014.
[Automatic Switch, Free Your Hands]: Cabinet light has two working modes, Motion & Light Sensor Mode, Always On and Off Mode. In G mode, this counter light automatically turns on when it senses human motion within 10 feet in a dark environment, and automatically turns off after 20 seconds of inactivity. You can use these lights as normal light or safe light.
[Upgraded Version & More Bright Sensor Closet Light]: With 20 LEDs(Not 10 LEDs) for each light, up to 160 lumens, more bright than other LED closet lights in the market, very easy to find what you're looking for and perfect to light up in a large space where there is no light system, like the cabinet, wardrobe, stairs, etc. HIBOITEC motion sensor light is the best choice for you.
[Larger Battery Capacity & Rechargeable]: Built-in 1000 mAh high-capacity rechargeable battery, has larger battery capacity than other led cabinet lighting, easily to charged via USB. After fully charged, these closet lights last for up to 8 hours under on mode and last 1-2 months under motion sensor mode. NEVER replace AAA batteries frequently. Energy Save & Save More Money!
[Two Ways to Install]: Easy to install and remove without any other tools. Using Magnetic Back Design, can stick on any ironwork, allows you to change the its location you need. Or you can use the included tape to attach the iron to any non-ferrous product surface. When you need to charge or change position, you can take down the closet lights at any time.
Solar Motion Light,Best Outdoor Motion Sensor Lights,Indoor Motion Sensor Light,Outdoor Sensor Lights
Ningbo Wason Lighting Technology Co.,Ltd , https://www.wasonlights.com