Standard Vacuum Lifter /Bag Sucker

Standard Vacuum lifter/bab sucker/vacuum sucker:

Our Co. devoted CW-glass series for Glass processing, curtain wall processing and Glass installation with reliability and safety. By different application purpose and site, We divided the lifters to three series: EPD (Electric powered lifter), BPD(Battery Powered lifter), Quattro movable trolley and WS-GR(powered Glass Robot),each of Them featured for different applications with different functions.
 
 

  
Main components:
 

  1. Vacuum blower: Siemens vacuum blower, model GS2.2, power supply 380V, 2.2KW, maximum vacuum flow 120cbm/h, maximum vacuum pressure -55kpa
  2. Lifting tube: diameter 140mm, tube length 3050mm, maximum lifting height 2100mm, maximum loading 35kg for semi-porous, 40kg for dense.
  3. Double suction pads for carton box ,the yoke length 400mm, mounted on the control housing by flange
  4. A ball bearing integrated upper rotation jointer with single way valve to prevent the goods falling down in case of power lost.
  5. Two-hands control unit with a rotation handle for up and down, the brake handle for release, the handle were extended for higher stack
  6. A plastic vacuum filter mounted on the column.
  7. A vacuum regulator mounted on the vacuum blower which protect the blower in case overheat, the preset vacuum pressure is -45kpa
  8. 8M vacuum feeding pipe of Diameter 52mm for vacuum connection
  9. A vacuum filter standard for keep air clean

The lifter was designed for transportation or handling the materials at:
Max.carrying capacity: 40kg for dense, 35kg for semi-porous
 
Stand jib crane
Maximum loads:     125kg
Total height:         3800mm
Working height:      3500mm
Jib length:           3000mm
Jib model:           250*250 square steel pipe
Sliding track:         aluminum alloy
Rotation degree:      270°
Loading slid trolley:    1 piece
Cable connection slid trolley: 3 pieces

Standard Vacuum Lifter /Bag Sucker
 

Standard Vacuum lifter/bab sucker/vacuum sucker:

Our Co. devoted CW-glass series for Glass processing, curtain wall processing and Glass installation with reliability and safety. By different application purpose and site, We divided the lifters to three series: EPD (Electric powered lifter), BPD(Battery Powered lifter), Quattro movable trolley and WS-GR(powered Glass Robot),each of Them featured for different applications with different functions.
 
 

  
Main components:
 

  1. Vacuum blower: Siemens vacuum blower, model GS2.2, power supply 380V, 2.2KW, maximum vacuum flow 120cbm/h, maximum vacuum pressure -55kpa
  2. Lifting tube: diameter 140mm, tube length 3050mm, maximum lifting height 2100mm, maximum loading 35kg for semi-porous, 40kg for dense.
  3. Double suction pads for carton box ,the yoke length 400mm, mounted on the control housing by flange
  4. A ball bearing integrated upper rotation jointer with single way valve to prevent the goods falling down in case of power lost.
  5. Two-hands control unit with a rotation handle for up and down, the brake handle for release, the handle were extended for higher stack
  6. A plastic vacuum filter mounted on the column.
  7. A vacuum regulator mounted on the vacuum blower which protect the blower in case overheat, the preset vacuum pressure is -45kpa
  8. 8M vacuum feeding pipe of Diameter 52mm for vacuum connection
  9. A vacuum filter standard for keep air clean

The lifter was designed for transportation or handling the materials at:
Max.carrying capacity: 40kg for dense, 35kg for semi-porous
 
Stand jib crane
Maximum loads:     125kg
Total height:         3800mm
Working height:      3500mm
Jib length:           3000mm
Jib model:           250*250 square steel pipe
Sliding track:         aluminum alloy
Rotation degree:      270°
Loading slid trolley:    1 piece
Cable connection slid trolley: 3 pieces

Standard Vacuum Lifter /Bag Sucker
 

Clean And Strip Disc

Strip clean disc is a new kind of Nylon fiber abrasive tools, can be the best substitute for traditional abrasive tools such as shutters and wire brushes.It is based on high-strength & wear-resistant fiber mesh, and the resin elastomer and nylon fiber and emery are bonded together by special process.


Materials
Rust remover disc uses high-strength wear resistant fiber mesh as the base material, and organically combines resin elastomer and
high-quality emery through a special process to form a high strength, high wear resistant, honeycomb shaped grinding wheel
Range of Application
* widely used for grinding and polishing of metal, glass fiber, wood, stone and other surfaces * Easily remove paint, varnish,
solder joints, rust, sealant, scale, oxidation and other surface contaminants. Poly strip disc wheel an ideal tool for surface treatment such as paint, rust, and scale removal
High Performance
The grinding wheel will not damage the surface of the object, the grinding force is uniform, the processing effect is uniform,
wear resistance, strong water resistance, strong plasticity and good softness. Dirt will not block the fine seams of the grinding
surface, no rust, no fall off, low grinding sound and less dust



The strip clean disc network structure has the following characteristics:
1. Does not damage the surface of the object
2. The grinding force is uniform, and the grinding effect is uniform
3. Abrasion resistance, strong water resistance
4. Strong plasticity, good softness, suitable for various shapes of objects to be ground.
5. The dirt does not block the surface of the abrasive tool, there is less shedding, less noise, and less dust.


We distributes and wholesales various brands of Bonded Abrasives, Abrasive Sanding Disc, Cutting Wheels , Abrasive Flap Disc , Flap Wheels , Flap Disc Backing Pad, Flap Disc Adhesive , and Surface Conditioning Product etc, and enjoy a high position among consumers.
Clean And Strip Disc 2 31 JpgClean And Strip Disc 2 13Clean And Strip Disc 2 33 Jpg

Clean And Strip Disc,Shaft Flap Wheel,Shank Mounted Flap Wheel,Keying Flap Wheel With Shaft

Zhengzhou Jiading Abrasive Manufacturing Co.,Ltd , https://www.jiadingabrasive.com