As a homeowner, the decoration quality is more about checking the quality of the decoration. After each link is completed, it must be carefully checked. The wall is the basic family, there are many places to pay attention to the acceptance of the wall, the following will come with Xiaobian inventory together.
Some kitchens and kitchens have poor quality of wall coverings, and the sandy layer of the napped layer is too large. You can wipe off the napped layer directly by hand. Xiao Bian reminds everyone that if such a problem arises, in the later tiling process, it is very easy to cause hidden safety problems of the tiles falling off.
2 empty wallCheck whether there is empty drum on the wall, we can use a special steel needle hammer (10g) to lay a few layers of paper and hit the wall. When the sound of striking the wall is not real-time, then it should be marked here and filled with putty at a later stage.
3 wall latex paintWhen the ambient light is dark, use a high-power light bulb (200 watts) to illuminate. The light is bright when the ceiling of the wall is flat. It will be immediately seen through the shadow of light. If it is not smooth, putty paint will be used again. If the paint is partially applied (patched) There will be differences with the primary colors of the walls.
4 wall leakingWall leak detection is generally best detected before the house is delivered and the next day after heavy rain. Mainly check the wall for water stains. Pay attention to the presence of water leaks on gables, kitchen bathroom tops, exterior walls, and other places.
Use a long ruler and other tools to approach the floor of the wall to detect if the wall is flat.
6 Wall verticalityAt present, the national standard requirement for the flatness and verticality of the wall is to measure using a 2-meter ruler, and the error is within plus or minus 3mm. If the error is large, it will have a great influence on the decoration of the later period.
7 Wall crack detectionWall cracks are relatively easy to detect. When testing wall cracks, we can inspect facade walls, load-bearing walls, floors, balconies, and other cantilevered structures.
8 wall putty waterproofWhen we check the wall putty waterproof, we can bring a bottle of water, splash the water net wall, touch it. If there is mud on the hand, then the water resistance of the putty on the wall is not off.
Impact: In the future, it will cause the wall to be hollowed and cracking serious.
Because the bottom layer is putty, it is a soft material. Gypsum has a relatively large degree of gel, and a long time can cause delamination with the underlying putty, so it is impossible to use gypsum on a large area of ​​putty.
Solution: After removing the underlying putty, level it with a plaster and finally scrape the putty.
Two walls are seriously unevenImpact: Affects the aesthetics of future renovations.
Solution: Relevel the wall.
The effect of excessive indoor corner defects of three indoor latex paints: a serious impact on the appearance of decoration.Solution: Repair the base putty and then repair the latex paint.
Wall construction
Pom Rod producted by AHD has the characteristics of high mechanical strength,high rigidity,sliding and abrasion resistance,good creep resistance,physiological inertia,bright, straight, flat, uniform color and good processing performance.Due to the good characteristics of POM Rod, it is very suitable for machining on automatic lathes, especially for the manufacture of precision parts.
|
Product |
Diameter(mm) |
Length(mm) |
Color |
Density(g/cm³) |
|
POM ROD |
15-120 |
2000 |
white/black |
1.42 |
POM Rod
Pom Rod,Extruded Pom Rod,Pom Plastic Rod,Polyformaldehyde Rod
Shenzhen Anheda Plastic Products Co.,Ltd , https://www.ahdplastic.com