Children's room lighting safety design notes:
1. Different designs in different areas.
The children's room has many functions such as games, learning, sleep, etc. The function areas are different and the lighting requirements are different.
Game area: It can be used as the main light source of the whole room, and the intensity and area of ​​light can be slightly larger.
Learning area: The light intensity is moderate, but it should be concentrated, because the child's vision is not yet mature, too bright light will damage the child's vision, and the area of ​​the light source will make the child's attention inattention.
Sleeping area: The light should be as soft and warm as possible, which helps the child to feel safe and help with sleep.
2. Avoid unbalanced lighting.
One is too bright and the other is too dark, which is an unbalanced design. Therefore, in addition to the main light source, some auxiliary light sources (such as wall lamps, floor lamps, table lamps, etc.) can be set to adjust the light difference in the room by the intensity of the light, the spatial position and the angle, thereby relieving the child's eyes. Fatigue and discomfort.
3. The reflected light should be washed up.
If you want to use indirect reflected light as ambient light, be careful to let the lamp cover reflect light upwards as much as possible, and do not reflect downward. Because the downward reflecting light source may cause light to shine directly into the child's eyes, damaging the child's vision.
4. Use spotlights with caution.
At PFMOLD we can design and produce dies according to your exact specifications or samples. The vast experience of our
engineers allows them to eliminate any potential problems and provide you with high quality Die Casting tooling that can be
used to create superior and efficient die casting products.
Type of the molds:
Lighting Accessories die casting Molds
Kitchen Utensils die casting Molds
Furniture Fittings die casting Molds
Aluminum Heat Sink die casting Molds
Digital die casting Molds
Metal Injection Mold
Mold Standard HASCO, DME, JIS, CHINA LKM
Mold Base LKM & HASCO & DME standard
Material Main Core & Cavity Insert
H13,DIEVAR, 8407, SKD61, 718, S136, 420ESR,NAK80,Hardness of Steel 46~56HRC
Cavity Single-cavity, Multi-cavity
Surface Finish EDM & High Polish
Mold Life Time 50,000shots,1,000,000shots
Applied Software Pro-E, Solid Works, UG, CAD
Quality ISO9001-2008 Certification
Lead-time 4-8weeks
Package Wooden/plywood case for tool
Furniture Fittings Mold,Furniture Fittings Mold, Plastic Mould
PF Mold Co., Ltd. , http://www.pf-mold.com