Cleaning method for stone seepage :
As the building is at the pivot, the relative pollution is particularly serious. Because the stone itself has capillary pores and water absorption, air pollution, dust plus acid gas in the air, exhaust gas of the steam locomotive, etc., accumulate on the surface of the stone over time, when it rains, acid rain will accelerate the erosion of these pollution on the stone and Adsorbed in the capillary pores of the stone, causing stains that are difficult to clean. Especially for the stone that burns the surface, these pollutions form faster and are not easy to clean. Only using commercially available cleaning agents can not remove these pollutions; If it is a smooth stone, these luster will soon be eroded.
Therefore, to remove these pollutions, you can use Kelin KL1606 stone cleaning agent, this kind of stone-specific cleaning agent can completely remove the pollution that penetrates into the capillary, and will not harm the stone. If you want to prevent the stone from being polluted again, you can use the protective treatment after the stone is cleaned and the stone surface is dry. This kind of permeable protective agent is commonly used in the customer forest KL10829 wall waterproof treasure , KL10849 stone protectant, these two protective agents can penetrate into the interior of the stone to form a protective layer, with waterproof, anti-fouling, anti-fouling, anti-rust, anti-oil, anti-weathering, anti-aging, acid and alkali, anti-tea The effect of stains caused by stains, cola, soy sauce, etc., can effectively control the production of Baihua, and does not damage the original permeability of the stone. The usual cleaning work can be achieved by simply wiping with water, without using other cleaning. Agent.
Pre-protection treatment of external wall pollution: Generally speaking, the outer wall of stone has a considerable height. Once it is contaminated, it will be cleaned and the construction is extremely inconvenient. If the protection can be done beforehand, there will be no pollution problems after completion. The daily cleaning work can only be wiped with water, and the protection cost before construction is low, the construction is easy, and the stone protection agent is used. This kind of breakthrough has improved the troubles of time and effort in the past protection treatment. This method has been widely used in stone engineering abroad.
Catalyst For Protecting Against Co And Desiccant
Catalyst For Protecting Against Desiccant,Desulfurization Pellet Carbon,Catalyst For Protecting Against Co,Wooden Column Of Activated Carbon
NINGXIA TIANFU ACTIVATED CARBON CO.,LTD , http://www.tjfyhxt.com