2, bamboo flooring specification should not be too large. The narrower the smaller the stress suffered heat bamboo flooring, the more stable, and therefore to heat the floor width not more than 125 mm, the thickness of the table plate is not more than 4 mm and a total thickness of the floor to Not more than 17 mm is appropriate.
3, the moisture content should not exceed 8% of the floor is the stability of the two predators shrinkage and swelling, geothermal bamboo flooring selected must take control the water content of 8% or less, this will increase the stability of the floor.
4. There are two kinds of paving methods for floors that are used for floor heating, and one type of glue type suspension.
Compared to wood flooring: Bamboo has a good texture with a touch between tiles and wooden floors, but some people feel that some people feel slightly harder.
Compared with the reinforced plate: bamboo flooring is a natural material color difference or some, some feel natural, some people think that the color does not look good.
Comparison between bamboo flooring: bamboo flooring quality control is strict, if you do not care to buy bad, there will be cracking hidden dangers, it is recommended to study more and compare.
We supplier a wide range of BSP, JIC, NPT, Din Metric, Flanges, Standpipes, Komatsu, Toyota, Hydraulic One piece Fittings, Reusable Hose Fittings etc. OEMs and fitting manufacturers are constantly finding new ways to stump us with different threads and new ways to seal them. Our other fittings incluld banjo fittings, banjo bolt, waterwash inserts fittings, SAE staplelok male fitting, double connector and so on. We also specializing in customized Hydraulic Fittings
High Pressure Hose Fittings,Braided Hose Fittings,Hose End Fittings ,Hose Barb Fittings
SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com