Inventory of foam plastic machinery is greatly affected by the development of the plastics industry

Foam-plastic machinery is an important pillar of the development of the plastics industry . It provides advanced technology and equipment for the plastics industry . Its development is the basis for the development of the plastics industry and is also affected by the development of the plastics industry. From a global perspective, the three major categories of plastic foam machinery are injection molding machines, extruders/extrusion lines and blow molding machines, which account for more than 80% of the total output value of plastic foam machinery, of which injection molding machines account for these three categories. More than half of the total mechanical. The industry believes that these three types of plastic foam machinery market prospects are promising.
High-tech injection molding machine demand is strong Because the injection molding machine has developed too fast in the past few years, now in addition to the mainframe, the general specification of the injection molding machine has been oversupply, and the sales volume can be maintained at around 1/3 of the peak period. However, some high-tech injection molding machines have gradually increased their market demand.
The first is an all-electric, all-hydraulic precision injection molding machine. The main products of this type of products are electronic communication, audio and video, home appliances, automobiles, etc. The processing conditions are relatively high, and the precision requirements for injection molding machines are also improved. These industries are all sunrise industries and have a lot of room for growth.
Second, the hollow injection molding machine developed rapidly. This is because the stress damage of plastic parts under vibration is a big problem in automotive plasticization and other engineering applications, and a variety of rubber and plastic materials combined with hollow injection molding technology can effectively improve the above defects.
The third is a new injection molding machine with air-assisted, water-assisted devices. This type of technology has a large near-term market, especially for products with higher appearance requirements and longer service life, such as home appliances, automobiles, and buildings.
Domestic extruders lack competitiveness, and the extruder market has maintained a slight upward trend due to the continuous expansion of the application market and technological breakthroughs. However, the market price of domestic extruders has fallen sharply, which is difficult to avoid, shoddy and price. The war has affected the overall image and market competitiveness of domestic plastic foam machinery, and has also hindered the development of the plastics processing industry. In the last two years, only Germany Claus? The company of Mafei has sold more than 100 different profile production lines with China. Most of the enterprises with strong plastic doors and windows and pipe processing industry are looking for imported equipment. This is a failure of domestic manufacturers. The future market of extruder mainframes and production lines will develop in the direction of higher technical content and lower prices.

There are many types of Natural Stone Wall Tile, including imitation granite tiles and imitation marble tiles, which are suitable for different places. The Exterior Wall Stone Tile is available in 300x600mm, 400x800mm, 600x900mm, 600x1200mm...


Advantage

1. The surface of the Outdoor Wall Tile Stone has a luster, flat or rough surface, and can present a variety of textures. The design is rich and varied, and has a strong decorative effect.

2, The Natural Stone Tile Outdoor brick has superior physical properties, sturdy and durable, good weather resistance, scrub resistance, etc., and has a long service life.

3, With easy to clean, fire, water, wear, corrosion and low maintenance costs.

4. Thin ceramic tiles on the outer wall, "light, large and thin", which greatly reduced the building load.

 

Stone tile exterior construction: adhesive construction, dry-hanging construction


Construction Notes

1. When the structure is constructed, the verticality and flatness of the outer wall should meet the standard requirements. The dust, dirt and grease on the surface of the base are removed.

2. On the base plastering surface, first hang the vertical and horizontal control lines, and then hang out the tile control line according to the size and arrangement of the tiles.

3. When the tile is pasted, the mortar should be full. It is not advisable to knock and move more. Especially after the mortar is collected, it cannot be corrected.

4. After the caulking is completed according to the design requirements, clean the surface with a clean cloth.

5. About 30 hours after the completion of the caulking (depending on the weather at the time), and after the brick joint has solidified to a certain strength, rinse the brick surface thoroughly from top to bottom with clean water.


Natural Stone Tile

Natural Stone Wall Tile,Natural Stone Tile Outdoor,Stone Tile Exterior,Outdoor Wall Tile Stone,Exterior Wall Stone Tile

UMS New Materials Industry Co.,LTD , https://www.ums-factory.com