The surplus may be seasonally narrowed
According to customs data, the foreign trade export pilot index was 40.1 in December 2014, down 0.7 from November, and fell for three consecutive months, hitting a new low since December 2013.
Zheng Yuesheng said that the negative factors that inhibit China's foreign trade in 2014 will continue for some time, including the weak global economic recovery, the weakening of domestic low-cost advantages, the decline in foreign investment in manufacturing, and the continued decline in commodity prices in the international market.
According to the latest macro research report released by CICC, it is expected that the year-on-year growth rate of imports and exports will fall in January, but the export growth rate will still be stronger than imports. The foreign trade surplus in January is expected to remain high. In the past five years, the foreign trade surplus in February and March has shown a seasonal narrowing trend, and even a deficit in a single month. It is expected that the foreign trade surplus will be narrowed seasonally in February and March 2015.
The record high trade surplus may continue to remain high in the short term. Liu Dongliang, a senior analyst at the Financial Markets Department of China Merchants Bank [microblogging] believes that the trade surplus continues to operate at a high level. Before the surplus narrowed significantly, the renminbi material remained stable or even slightly appreciated, making it difficult to see the devaluation space. The Economic Blue Book released by the Chinese Academy of Social Sciences recently predicts that the import and export growth rate will be around 6.6% in 2015, with exports increasing by 7.5% and imports increasing by 5.5%.
In 2014, foreign trade has made positive progress in improving quality, improving efficiency, and superior structure. This situation is expected to continue to increase in 2015. Zheng Yuesheng said that in 2014, China's foreign trade development showed five highlights, including: the increase in the proportion of foreign trade to the bilateral trade in emerging markets, indicating that market diversification has made positive progress; the proportion of general trade has increased, indicating that the trade pattern is more reasonable, and the domestic economic development The strength is more prominent; the proportion of private enterprises in the main body of foreign trade has increased, indicating that the endogenous power of foreign trade has been further enhanced; the structure of import and export commodities has been continuously optimized and upgraded; the terms of trade prices have been improved.
"One Belt, One Road" material boosts import and export
The industry believes that the implementation of the “One Belt, One Road†strategy will help boost imports and exports.
According to preliminary estimates by the General Administration of Customs, in 2014, the bilateral trade value of China's import and export with the “Belt and Road†countries or regions was close to 7 trillion yuan, an increase of about 7%, accounting for a quarter of China's total foreign trade import and export value during the same period. Among them, China's exports to countries along the “Belt and Road†have grown by more than 10%, and imports have grown by about 1.5%. Zheng Yuesheng said that with the continuous evolution of the “One Belt and One Roadâ€, this data will be further improved.
In addition to the “Belt and Roadâ€, the newly established Tianjin-Jiangxi Free Trade Zone is also expected to boost foreign trade. Zheng Yuesheng said that regarding the state's preparation for the newly established three free trade pilot zones in Tianjin, Fujian and Guangdong, the relevant overall plan is currently being developed. The General Administration of Customs will actively cooperate with the formulation of the plan to further replicate and promote the successful experience of the Shanghai Free Trade Zone. Since the Shanghai Free Trade Zone has been in operation for more than a year, the customs system has promoted and replicated 23 basic systems of the Shanghai Free Trade Zone in special supervision zones across the country, and achieved remarkable results.
PPO plastics (MPPO)
(polyphenyl ether)
English name: poly(phenylene oxide)
Weight: 1.07 g/cm3 molding shrinkage rate: 0.3 0.8% molding temperature: 260-290 ℃ drying conditions: 130 ℃ for 4 hours
Material performance 1, for white particles.The comprehensive performance is good, PPO plastics can be used in 120 degree steam, electric insulation is good, absorb water is small, but have stress crack tendency.Modified polyphenyl ether can eliminate stress cracking.
2. Excellent electrical insulation and water resistance, good dimensional stability.Its dielectric properties are the first in plastic.
3. PPO plastics has mixed the modified materials for PPO plastics and HIPS, and the materials on the market are now made of this material.
4. High heat resistance, 211 degrees of vitrification temperature, 268 degrees of melting point, and the decomposition tendency of heating to 330 degrees. The higher the PPO plastics's content, the better the heat resistance, and the heat deformation temperature can reach 190 degrees.
5. Good flame retardancy, self-interest, and with HIPS mixed with moderate flammability.Light and non-toxic can be used in food and medicine industry.The resistance to rotation is poor, and the use of long time in the sun will change color.
6. PPO plastics can be combined with ABS plastics ,HDPE plastics,PPS plastics ,PA plastics, HIPS plastics, Glass Fiber, etc.1. Suitable for heat resistant parts, insulation parts, wear resistant parts, transmission parts, medical and electronic parts.
2. The parts can be used in high temperature, such as gears, blades and valves, which can be used for stainless steel.
3. Make screws, fasteners and fittings.
4. Electrical components of motor, rotor, casing and transformer.
1. Non-crystalline material, small moisture absorption.
2. The fluidity difference is similar to Newton's fluid, the viscosity is sensitive to the temperature, the product thickness is generally more than 0.8mm.It is very easy to break down and decompose into corrosive gases.The molding temperature should be strictly controlled, the mould should be heated and the flow resistance should be small.
3, Polyphenylene oxide, bibulous rate is about 0.06% less, but traces of water will lead to product surface not smooth phenomenon such as silver, it is best for dry processing, temperature is not higher than 150 degrees, otherwise the color will change.
4. The forming temperature of polyphenyl ether was 280-330 degrees, and the forming temperature of modified polyphenylene ether was 260-285 degrees.
Sheet specification: thickness from 2mm- 120mm, specification 600* 1200mm, other color and specification can be customized
Bar specification: diameter from 10mm- 200mm, length 1000mm, other color and specification can be customized.
PPO Plastic Sheet,PPO Plastic Products,PPO Material Plastic Sheet,Engineering PPO Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com