How to use hydraulic torque wrench correctly?
First, determine the maximum torque required for the bolt. It can be found by the bolt torque recommendation table. For example, M72, 8.8 bolts, check the torque of 2108Nm, multiply by 70% to 1475Nm, through the sleeve transition, as long as the working space of the wrench Just fine.
In the above example, the FSX20 hollow type hydraulic wrench can also be selected. The hollow hexagonal size of 105 mm corresponding to M72 is required. Of course, other bolts can be used with special hexagonal sleeves.
In order to achieve a higher degree of imprisonment, a pump can be selected with two sets of wrenches at the same time. Only two additional oil pipes and a pair of adapters can be added to complete the bolt assembly and disassembly work.
Concerned about surprises
Label: How to use hydraulic torque wrench correctly
Previous: Typical parts for riveting Next: Use of secondary printing for self-adhesive labels
Sight Glass is used for observe the medium in the pipe system, Ningbo RMI Plastic Co.,Ltd offer Plastic Sight Glass with PVC, CPVC, PVDF, PP body and borosilicate glass. Plastic sight glass is most suitable for corrossive medium, it is widely used in chemical industria pipe systems. flange end fit for DIN PN10, ANSI CL150 and JIS 10K standards.
Ningbo RMI Plastic Co.,Ltd offer Sight glass with specification:
Size:DN15~DN300 (1/2 inch ~ 12 inch)
Connection: Flange DIN PN10, ANSI CL150, JIS10K
Body Material: PVDF, PVC, CPVC, PP, WCB lined PTFE
Glass:Silicate glass
Sealing: EPFM, Viton
Sight Glass
Plastic Sight Glass,PVC Sight Glass,PP Sight Glass,PVDF Sight Glass
Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com