In recent years, home decoration will use the integrated ceiling lights integrated ceiling lamp has more advantages, but not perfect, it also has the inevitable disadvantage that maintenance is too much trouble, if there are parts need to be replaced, usually the owners want to Its replacement has no way to start. Then the following Xiaobian introduced the selection and replacement method of integrated ceiling lights for everyone.
How to choose an integrated ceiling light
1, installation, cleaning must be convenient
The first point in selecting an integrated ceiling light is to see if the integrated ceiling light you have selected is easy to install and disassemble. It must also be clean. This will save you a lot of time in the daily cleaning process. Even if you replace it later, it is very convenient.
2, ballast
The ballast is best to choose the electronic ballast, because the electronic ballast has the characteristics of improving the luminous efficiency and life of the lamp. At present, all fluorescent light sources on the market must have ballasts to ignite. Its role is to bring instantaneous starting voltages to the light source and stable voltages during operation. It can be seen that the quality of the ballast will directly determine this. Lamp life and light efficiency.
3, choose the color temperature not too high integrated ceiling light
The so-called color temperature is the temperature of the color of the light source. The color temperature of the integrated ceiling light of the yellow light is below 3300K, and the color temperature of the integrated ceiling light of the white light is above 5300K. Of course, there is also a difference between the two. Different lighting effects and color temperatures will ultimately lead to differences in the integrated ceiling light line. Therefore, when selecting an integrated ceiling light, be sure to look at the color temperature value. The easiest way to judge the color temperature is to place the palm of your hand close to the light source and look at the color of your palm. If it is rosy, it means the color temperature is just right.
4, choose the type of integrated ceiling lamp phosphor
At present, fluorescent lamps use more than one type of phosphor, which can be easily found. At present, the fluorescent powder used by the fluorescent lamp is the best three-color powder, because the integrated ceiling lamp using this kind of phosphor is the most energy-saving, and the light is soft, and the color rendering is high, and it is closest to the natural light color.
5, choose the lampshade of integrated ceiling lamp
The cover of the integrated ceiling lamp is recommended to choose the acrylic mask, because this kind of lamp cover is soft, light, and it has good light transmission and is not easy to be dyed. However, when selecting acrylic shades, be careful not to make the edge of the shade too thin, otherwise it will break easily. If you choose an integrated ceiling lamp with a glass shade, you should consider it carefully.
6, the overall effect of integrated ceiling lights
How to look at the overall effect of integrated ceiling lights? To do this is very simple, because a good integrated ceiling light is bright and bright, there is no dark spots after lighting, the lampshade and the entire integrated ceiling coordination is harmonious, then the overall effect is very Not bad.
Integrated ceiling lamp replacement method
In fact, in many consumers' eyes, the module replacement of the integrated ceiling is complete and simple. Take the integrated ceiling light as an example. If the integrated ceiling light (integrated ceiling lighting module) is broken and needs to be replaced, then only the power is off. Under the premise of using the suction cup to remove the module next to the lamp, and then remove the lamp base on the line, but you must remember to power off.
Editor's summary: The selection and replacement methods for integrated ceiling lights are introduced here. For more information, you can follow this site information.
chandelier
Water Reducer mainly is used for cement in construction field. Used for and widely for self-cured, vapor-cured concrete and its formulations. At the early stageof application, extremely prominent effects are shown. As the result, the modulus and site utilization can be drastically, the procedure of vapor cure is omitted in peak-heatsummer days. Statistically 40-60 metric tons of coal will be preserved when a metric ton of the material is consumed.The new raw material is researched and produced by ourselves, which is mainly used in theproduction of polycarboxylate superplasticizer products.
Remarkable plasticity: as a condition of blending where amount of cement and collapsibility are fixed aforehand, mixing water can be decreased by 18-28% when it is admised with reinforced concrete at 0.5-1.0%. Ststistically, compression strendth on the 1st day, the 3rd day and the 28th day after single application is increased by 60-90% and 25-60% respectively when it is added at standard blend dosage. As the result, compression strength, tensile strength, bucking strgth and modulus of elasticity will be improved to some extent.
*Related Products:water clarifer,water reducers for concrete.
Water Reducer
Water Reducer,Sodium Polynaphthalene Sulfonate,Sodium Naphthalene Sulfonate,Concrete Water Reducer
SJZ Chenghui chemical co ltd , https://www.chenghuichemicals.com