Today's second-hand housing market can be said to be in full swing, and most people will spend a lot of money on redecorating after purchasing second-hand housing. Compared to new home decoration, second-hand housing renovation is a systematic project. Whether in the design and construction and other links are not a small difference. Want to successfully decorate second-hand housing, you must first understand the secondary housing renovation process and precautions Oh! If you are not familiar with the second-hand housing renovation process and precautions , may wish to seriously read this article, will certainly let you benefit Ah!
Second-hand housing renovation process and precautions
First, second-hand housing renovation process:
(1) Before renovating, you need to prepare some used renovation tools. The necessary ones must be taken with you. For example: tape measure (buy 5m), calculator, and big board clip. In the second-hand house renovation process, the selection tool must be ranked first. This justified the truth that “the sharp knife did not cut the firewoodâ€. It is advisable to prepare old towels and plastic bags in advance and wrap them around the pipe joints to prevent them from blocking.
(2) Before the renovation, first measure the area of ​​use, and use the notes, we must not be lazy. The content of the measurement includes: the area involved in the clear decoration. In particular: tiling area, wall paint area, wallpaper area, floor area; clear main wall size. In particular, the size of the wall on which the furniture needs to be placed.
(3) The main demolition reform is the first item on the project, including: demolition of walls, walls, shovel wall, demolition of heating and so on. The dismantled garbage should be cleaned up in a timely manner to ensure that the interior is clean, but also for the convenience of later construction. In the process of house decoration, the finished door should be set. It is best to understand the cabinet, the hood, the stove and the water heater, and make sure.
Second, second-hand housing decoration matters needing attention:
1. Demolition and cleaning
After all, second-hand housing is a secondary decoration, so the original decoration must be dismantled and cleaned up. This work mainly includes: dismantling old windows and doors, removing the original wall surface, and even knocking down the original tiles or the ground. Here, it is important to elaborate that when changing doors and windows, it is best to finish before brushing walls, wrapping mouths and sticking wall tiles.
2. Hydropower renovation
In the process of housing renovation, hydropower reform is a top issue. If the life span of the house is short, the line will generally not cause any major problems. If the house is relatively old, it is necessary to consider the re-laying of hydropower. For the later construction. After the completion of the hydropower reform, distinguish between strong and weak electricity, water pressure and waterproof tests.
3. Wall treatment
The treatment of the walls in each area mainly includes: wall leveling, repair of cracks, scraping of putty, etc. Finally, the paint is applied. In this process, it is necessary to pay attention to the cabinet measurement at this time, so that the measured dimensions will be More accurate.
Editor's summary: The above is to bring you the second-hand housing renovation process and precautions , second-hand housing decoration is not there are many places that need attention! Hope that the above description can help to immediately decorate friends, if you want to know other For related information, please continue to pay attention to this site, more exciting so stay tuned!
Second-hand housing second-hand housing decoration second-hand housing decoration notice
The distributor chute is a kind of wearing parts , which serves a very short working time, mostly maintain 6 to 12 months. Under high temprature working condition, the anti-abrasion performance of metallic material will be degraded. Take 850℃ working temprature and impact property into account, Hard-plate adopts HP300 welding wire to satisfy blast furnace severe condition.
High Temperature Distributor Chute
High Temperature Distributor Chute,Chromium Carbide Hardfacing Overlay,Blast Furnace Distributor Chute,Chromium Carbide Distributor Chute
SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com