1, the scope of the workshop mobile dust collector.
2. Responsible for mobile dust collector operators.
3. Content: Standard operating procedure for mobile dust collector operation
1, the scope of the workshop mobile dust collector.
2. Responsible for mobile dust collector operators.
3, content:
Preparation: Check that the equipment is clean. Check if the fan is working properly. Check whether the piping system is free.
Operation process:
Turn on the mobile dust collector fan power? The motor runs normally and starts dusting.
After the dust removal operation is finished, turn off the fan power of the mobile dust collector. Use a manual pull rod to shake the cloth bag of the mobile dust collector, make the bag-enriched dust fall into the dust box, remove it, and treat it as waste.
Do a good job of cleaning the mobile dust collector.
Precautions:
After turning on the power, pay attention to the operating status of the fan.
If the dust removal effect of the mobile dust collector is not good during the dust removal process, the bag dust of the mobile dust collector should be cleaned to enhance the dust removal effect of the mobile dust collector.
The operator pays attention to labor protection.
Abnormal situation processing:
Dust fly: Dust-removal system pipe plugging - dredge dust removal system piping;
The dust collection system is not closed tightly: closed dust collection system piping;
Closing of the bag of the mobile dust collector - cleaning or replacing the bag of the mobile dust collector;
Noise from the motor: Lack of lubrication-lubrication;
Bearing imbalance - re-commission the motor.
2. Responsible for mobile dust collector operators.
3. Content: Standard operating procedure for mobile dust collector operation
1, the scope of the workshop mobile dust collector.
2. Responsible for mobile dust collector operators.
3, content:
Preparation: Check that the equipment is clean. Check if the fan is working properly. Check whether the piping system is free.
Operation process:
Turn on the mobile dust collector fan power? The motor runs normally and starts dusting.
After the dust removal operation is finished, turn off the fan power of the mobile dust collector. Use a manual pull rod to shake the cloth bag of the mobile dust collector, make the bag-enriched dust fall into the dust box, remove it, and treat it as waste.
Do a good job of cleaning the mobile dust collector.
Precautions:
After turning on the power, pay attention to the operating status of the fan.
If the dust removal effect of the mobile dust collector is not good during the dust removal process, the bag dust of the mobile dust collector should be cleaned to enhance the dust removal effect of the mobile dust collector.
The operator pays attention to labor protection.
Abnormal situation processing:
Dust fly: Dust-removal system pipe plugging - dredge dust removal system piping;
The dust collection system is not closed tightly: closed dust collection system piping;
Closing of the bag of the mobile dust collector - cleaning or replacing the bag of the mobile dust collector;
Noise from the motor: Lack of lubrication-lubrication;
Bearing imbalance - re-commission the motor.
Silicon Briquette,Silicon Slag Briquette,Silicon Carbide Briquette,Silicon Alloy Briquettes
YINCHUAN BINHE ABRASIVES CO.,LTD. , http://www.nxbhzhang.com