[China Aluminum Industry Net] Industrial aluminum profiles produce waves, twists, and bends due to the uneven profile of the metal caused by the uneven flow of the material.
The main reasons are as follows: 1. The working design of the aluminum extrusion die is unreasonable, resulting in uneven metal flow;
2. Excessive extrusion speed or extrusion temperature of aluminum extrusions cause uneven metal flow;
3, aluminum alloy grid mold hole layout is not reasonable caused by uneven metal flow;
4. The guideway is not suitable or no guideway is installed;
5, lubrication is not suitable.
Solution 1. Trim aluminum extrusion die to make the metal flow evenly;
2, using a reasonable extrusion process, as far as possible under the premise of ensuring the exit temperature using low-temperature extrusion;
3, rational design of aluminum extrusion die structure;
4, configure the appropriate guide;
5, reasonable lubrication;
6, using aluminum extrusion traction traction.
The manual installation of the wrench is a tool that uses a manual installation of the wire sleeve. According to the shape of the front end, it can be divided into two types: 1. T-slot manual installation wrench. 2. Threaded head type manual wrench. The T-slot manual mounting wrench is a general-purpose mounting tool for a variety of shank inserts. Threaded head mounting wrenches are suitable for fine threaded sleeve installation.
Manual Thread Insert Installation Tool
Thread Repair Kit,Helicoil Insert Tool,Insert Installation Tool,Manual Thread Insert Installation Tool
Xinxiang Donghai Industry Co., Ltd. , https://www.thaicoil.com