Customer needs and analysis:
1. When the outside line of the phone is cut off, the alarm information can be transmitted through GSM.
2, can be networked with the center station, the center station can distinguish which user alarm, in order to timely dispatch police to deal with the police situation.
3. The number of defense zones that each user needs to guard against theft is greater. (in more than 30 zones)
4, the alarm extension should be able to display the type of alarm.
5, the alarm extension should be able to remotely deploy/disarm, and does not generate costs, so as not to increase the burden on the user.
6, can be partitioned arm, to facilitate the user at home or go out to set different defense zones, and can be scheduled to disarm.
7. The wireless distance between the wireless detector and the alarm host is about 100 meters.
8, with emergency button, so that when violent robberies start an emergency alarm, the management center can timely police.
9, should have enough power storage capacity, AC power, the host can work properly.
GSM/PSTN dual network anti-theft alarm system working principle analysis:
1. After the alarm system is installed, the zones will be armed. When there is illegal invasion, touch the infrared detector alarm, the detector will wirelessly transmit the alarm signal to the user, the user extension immediately alarm, and call the pre-set duty staff phone or mobile phone and management center number, the management center computer to display user information (Alarm location, alarm type, electronic map, etc.)
2. When the emergency button and the foot switch were installed under the staff work table and the criminals wanted to carry out violent robberies in the workplaces such as the savings bank and the bank, the staff could press the emergency button to immediately send a loud decibel alarm to the deterrent. Criminals also sent police information to the security office and management center to obtain foreign aid. The emergency button is in the all-weather defense zone and is not controlled by arming and disarming.
3. If someone cuts off the telephone line and destroys the alarm system, it will automatically transfer to the GSM network and send the alarm information to the alarm management center or the responsible person's mobile phone to increase the safety and reliability of the system and achieve all-weather, all-round monitoring of the burglar alarm.
4. The user can arm or disarm the user's extension through the wireless remote control, password pad, and remote phone.
5. The alarm extension can automatically recognize the pre-set mobile phone number, and can use the mobile phone to perform non-local deployment/disarming to achieve zero bills without increasing the economic burden on the user.
solution:
1. Installed (JA-2099LCD) dual network anti-theft alarm system as an alarm extension.
2. The anti-theft place installs the wireless infrared detector JA-010. When there is illegal invasion, the detector sends an alarm signal to the alarm extension and triggers the alarm extension alarm.
3. A foot switch is installed under the desk of the staff. When a violent robbery occurs, the switch is toggled with the toes and the alarm extension immediately reports an alarm.
4. Install an external sirens to activate an external siren when the extension alarms to deter intruders.
1. When the outside line of the phone is cut off, the alarm information can be transmitted through GSM.
2, can be networked with the center station, the center station can distinguish which user alarm, in order to timely dispatch police to deal with the police situation.
3. The number of defense zones that each user needs to guard against theft is greater. (in more than 30 zones)
4, the alarm extension should be able to display the type of alarm.
5, the alarm extension should be able to remotely deploy/disarm, and does not generate costs, so as not to increase the burden on the user.
6, can be partitioned arm, to facilitate the user at home or go out to set different defense zones, and can be scheduled to disarm.
7. The wireless distance between the wireless detector and the alarm host is about 100 meters.
8, with emergency button, so that when violent robberies start an emergency alarm, the management center can timely police.
9, should have enough power storage capacity, AC power, the host can work properly.
GSM/PSTN dual network anti-theft alarm system working principle analysis:
1. After the alarm system is installed, the zones will be armed. When there is illegal invasion, touch the infrared detector alarm, the detector will wirelessly transmit the alarm signal to the user, the user extension immediately alarm, and call the pre-set duty staff phone or mobile phone and management center number, the management center computer to display user information (Alarm location, alarm type, electronic map, etc.)
2. When the emergency button and the foot switch were installed under the staff work table and the criminals wanted to carry out violent robberies in the workplaces such as the savings bank and the bank, the staff could press the emergency button to immediately send a loud decibel alarm to the deterrent. Criminals also sent police information to the security office and management center to obtain foreign aid. The emergency button is in the all-weather defense zone and is not controlled by arming and disarming.
3. If someone cuts off the telephone line and destroys the alarm system, it will automatically transfer to the GSM network and send the alarm information to the alarm management center or the responsible person's mobile phone to increase the safety and reliability of the system and achieve all-weather, all-round monitoring of the burglar alarm.
4. The user can arm or disarm the user's extension through the wireless remote control, password pad, and remote phone.
5. The alarm extension can automatically recognize the pre-set mobile phone number, and can use the mobile phone to perform non-local deployment/disarming to achieve zero bills without increasing the economic burden on the user.
solution:
1. Installed (JA-2099LCD) dual network anti-theft alarm system as an alarm extension.
2. The anti-theft place installs the wireless infrared detector JA-010. When there is illegal invasion, the detector sends an alarm signal to the alarm extension and triggers the alarm extension alarm.
3. A foot switch is installed under the desk of the staff. When a violent robbery occurs, the switch is toggled with the toes and the alarm extension immediately reports an alarm.
4. Install an external sirens to activate an external siren when the extension alarms to deter intruders.
Stranded Bare Copper Cable,Copper Stranded Conductor,Bare Copper Wire and Cable
Huawei Aluminum Co., Ltd. , http://www.hnaluminumcoil.com