Protection of the Puffing Machine
Source: China Bearing Network | Time: 2013-06-24
Proper maintenance and protection of a puffing machine are essential to ensure its smooth operation, extend its service life, and prevent costly breakdowns. Here are some important guidelines to follow: (1) The casing bearings should be regularly lubricated with grease. After 500 hours of operation, the grease should be replaced. For new machines, it is recommended to change the oil after 200 hours of initial use to ensure optimal performance. (2) Other bearing components should also be greased periodically to maintain their efficiency and reduce wear and tear. (3) When disassembling or assembling wearing parts such as screws and threaded sleeves, avoid using heavy hammers. Do not place heavy objects on the expansion chamber or stand on it. Also, make sure that the imported pump valve is properly handled to avoid damage. (4) Always finish the puffed material before stopping the machine. Be cautious of foreign objects like metal entering the system, which can cause internal damage. (5) Regularly check the condition of the extruder and replace any worn-out parts promptly to prevent further issues. (6) Maintain cleanliness around the equipment to ensure a safe and efficient working environment. (7) If the puffing material will not be used for an extended period, make sure to clean out the material from the puffing chamber. This prevents clumping, mold, or contamination between different materials. (8) Since the wearing parts near the discharge end tend to wear faster than those near the feeding port, it's best to replace them starting from the discharge end and move sequentially. This ensures even wear and prolongs the life of the entire system. By following these maintenance tips, you can significantly improve the performance and longevity of your puffing machine.
Recommended for friends: Comments | Close Window
| Bearing Related Knowledge |
| Jiuzhou: Eight types of bearings distribution – Thrust ball bearing type PY160C motor grader transmission input bearing damage treatment Seat bearing protection process flow without defects US company develops new metal seal drilling drill bit progress Bearing life work inspection matters |
This article is linked to http:// Please indicate the bearing network http://
Previous: KYO Bearing Knowledge on Temperature Viewing | Next: Analysis of Rolling Bearing Repair Issues
Surface Mounted Waterproof Downlight ,Embedded Waterproof Downlight,Recessed Deep Anti-Glare Downlight,Recessed Direct Downlight
FOSHAN CITY KURUI LIGHTING CO.,LTD , https://www.kuruilighting.com