Regulations for the use of road sweepers during the run-in period

Driving regulations during the run-in period of sweeping sweeper:
1. Keep a steady start, avoid slamming the throttle, and do not make the engine speed too high.
2. Before the start of Hubei Chengli Road Sweeper, the water temperature should reach above 50°C. Start with a low block and switch into a high block after 1 km. The water temperature in the vehicle should be controlled at 80°C-90°C.
3. The road sweeper of Hubei Chengli Special Purpose Vehicle Co., Ltd. shifts gears in time in a timely manner. Do not use a gear for a long time or use a high speed gear or a low speed gear. ?
4, the sweeper choose a good road, to avoid excessive vibration, collision or emergency braking. Before the brake, the clutch should be divided.
5, the choice of high-quality fuel and oil, should not use engine wear additives.
The road sweeper during the run-in period should be checked regularly to find problems and solve problems in advance. Oil, cooling water, tire gas, etc., must be sufficient, no leakage occurs, and should be promptly replenished when found to be in deficit. If there are abnormal noises in some parts, it must be repaired in time.
Hubei Cheng Li Special Automobile Co., Ltd. Service Department is always at your service!

Customize Hydraulic Cylinder

Customize Hydraulic Cylinder, Automatic Parking Equipment Hydraulic Cylinder, China Customize Hydraulic Cylinder

Wantong Hydraulic Co.Ltd. , http://www.sdhydro-cylinder.com