Vibrating wire inclinometer
The 6001 vibrating wire inclinometer is widely used for long-term measurement of horizontal or vertical inclination of hydraulic structures and rock masses such as concrete dams, face dams and earth-rock dams. It is also applicable to industrial and civil buildings, roads and bridges. Tilt measurement of tunnels, etc. It can be installed as a permanent fixed tilt meter, or it can be temporarily installed and used repeatedly. With different mounting bases, the angle of the measured object can be measured.
regulation     Grid: 6001 6001A
Measuring range: -10°~+10°
Minute  Distinguish  Force: ≤0.015% FS ( minimum reading 10")
Comprehensive error: ≤1.5%FS
Operating temperature: -25 °C ~ +60 °C
Are always more numerous the installations of panels for the production both electric current and heat energy for building heating and for hot sanitary water production. But the installation of these plants have to clash with the continuous exposure of these to the disparate atmospherics conditions, from the cold of the winter season, due to the necessity of positioning the panels on the covering of the buildings, where the harshness of atmospherics changes is further amplified. The utilized materials for the built are submitted to hard stress and an high risk of wear and tear due to the corrosion. So these are the conditions on which the aluminium extruded profiles alusic better express theirs advantages compared with the building traditional materials, like steel, so far used in a lot of installations.
Huaxin power profiles advantages:
• more reduced weight of the structures;
• high resistance to corrosion thanks to anodization thickness 13-15 μm of the profiles surface and the tendency of the material to passivate in the air;
• high strenght reported to weight, obtained thanks to an attentive study of the profilesturned to the optimisation of the mass in function of the maximum of strenght;
• easy realization of the structures thanks to the large range of accessories studied on purpose of Solar Panels installations and the absolute compatibility with all the ALUSIC accessories;
• aesthetics impact reduced to minimum;
• absolutely diamagnetic of the material;
• easily recycling of the material turn to safeguard the environment also in case of dismantling of the structures.
Extruded aluminium profiles are realized in primary aluminium alloy en aW-6060 (almgsi 0.5) – en aW6063 (almgsi1). The metallurgic state of supplied bars is T6 (solution heat treatment and artificially aged).
The dimensional tolerances follow for the extrusion are in compliance with the normative for precision extruded EN12020-1.
Besides as guarantee of high quality and dependability of aluminium profiles and accessories for solar installations the quality system of ALUSIC is in accordance with the requirements of the normative UNI EN ISO 9001:2008; this is confirmation of a continuous control on raw materials and on the processing that is steady quality and improvement of products.
Finally Huaxin poower put to finally customers` disposal its Technical and Commercial Departments in the way to solve every needs and research the best solution to realize solar installations.
Solar Aluminum Structure,Aluminum Solar Panel Frame,Aluminum Solar Panel
Yangzhong Huaxin Power Equipment Co.,Ltd , http://www.huaxinbusbarchina.com