Steel Tube Factory introduces surface treatment methods for straight seam steel tubes

1. The cleaning of straight seam steel pipe uses solvent and emulsion to clean the surface of steel to remove oil, grease, dust, lubricant and similar organic substances. However, it cannot remove rust, oxide scale, welding flux, etc. on the surface of steel. It is only used as an aid in production.
2, the tool of the straight seam steel pipe rust removal The main use of wire brushes and other tools on the surface of the steel, can remove loose or tilt of the scale, rust, welding slag and so on. The manual tool derusting can reach Sa2 level, and the derusting of power tools can reach Sa3 level. If the steel plate surface is attached with a solid iron oxide scale, the rust removal effect of the tool is not satisfactory, and the depth of the anchoring lines required for anti-corrosion construction cannot be achieved.
3. Pickling of straight seam steel pipe is generally done by chemical and electrolysis. Pickling can only be removed by chemical pickling. It can remove scale, rust, and old coatings. It can be used as a sand blasting rust remover. Reprocessing. Although chemical cleaning can make the surface reach a certain degree of cleanliness and roughness, its anchorage is light and it is easy to pollute the environment.

Acrylic Boards

Acrylic Sheets,PVC Sheet,Plastic Panel

UV Boards,Wardrobes Co., Ltd. , http://www.wall-board.com