| Home>Bearing knowledge>Sliding bearing structure design is the most important thing to pay attention to |
The most important matters for the design of sliding bearing structure
Source: China Bearing Network Time: 2013-03-20
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
2. Avoid sharp edges and sharp edges that block the oil film.
3. Do not block the oil hole.
4. Do not open the full ring oil groove in the middle of the bearing.
5, to make the oil film smoothly into the appearance of conflict.
6. Oil should enter the bearing from the non-bearing surface area.
7, to make the oil ring to the oil is strong and reliable.
8, do not constitute an oil inactive area.
Recommend to friends comments close window
| Bearing related knowledge |
| Bearing professor analyzes the reasons for the failure of linear bearings and the basic requirements of the bearing steel quality of the bearing. The opening of the door is analyzed. The factors affecting the bearing life and the normal repair and protection of the car wheel bearing are controlled. |
This article links to http://
Please indicate the bearing network http://
Previous:Details of bearing damage to the next section: Detailed discussion on the function and characteristics of "spindle bearing oil"
Dynasul Liquid Dyes are environmental-friendly liquid sulfuration dyes . Dynasul dyes are Sulphur Dyes for cotton with good wash fastness.
Sulphur dyes are inexpensive dyes used to dye cotton with dark colors. Dyeing is effected by heating the fabric in a solution of an organic compound, typically a nitrophenol derivative, and sulphide or polysulfide. The organic compound reacts with the sulphide source to form dark colors that adhere to the fabric. Sulphur Black 1, is our largest selling sulphur dye by volume.
Sulphur Dyes
Sulphur Dyes, Sulphur Green Dyes, Sulphur Black Dyes
Dynasty Chemicals (NingBo) Co., Ltd. , http://www.dychemco.com