Hite CNC machine tool machine advantages

1. The original three-dimensional adjustable design of the Hait CNC machine tool body is analyzed through finite element analysis, and the structure is optimized to the maximum extent. So that the body is stable and reliable to prevent deformation of the body to improve the service life.

2. Wide and thick machine base, using honeycomb staggered ribs to ensure the stability of the machine, and reduce the vibration of the machine cutting.

3. The design of the box-type sliding seat, the dense rib arrangement inside the box, multiplies the maintenance of the precision of the machine tool.

4. Using our original “hunchback” type column design, it effectively prevents the deformation of the body and increases the rigidity of the spindle at the high point.

5. Enhanced workbench design, the increase in the thickness of the workbench, effectively hidden the interference of the installation of the linear guide rail slide on the table. At the same time there is an increase in rigidity.

6. The X, Y, and Z axis rails use a large span ratio. The overall increase in machine weight increases the stability of the machine.

7. The roller screw nut has a long design, and the pre-tightening force of the nut is effectively improved, which greatly extends the service life and accuracy of the machine tool.

8. Roller screw adopts pre-assembled locking nut structure, which effectively prevents the locking nut from loosening.

9.Using our original active lubrication system, the oil from the oil pump can be directly controlled by the numerical control system. It can truly fill the oil on demand, and can sense the problems caused by the oil passage of the machine and provide customers with an early warning to prevent damage to the machine.

10. Fully-enclosed box-type housing design, the bearing is changed from traditional grease lubrication to oil pump lubrication. Both can always lubricate the bearing, but also reduce the bearing temperature. The bearing life is improved.

11. Supported pulley block protection. When the inner protection is in motion, it is always parallel to the guide rail, and it is not easy to deform. The waterproof reliability is improved and the service life is improved.

12.Hydraulic CNC Each machine tool must accurately match the weight of the Z-axis weight according to the customer's application. Targeted optimization of problems between the machine and the customer's product.

If you have the need of processing center, please login to http://contact us, we will serve you wholeheartedly.