The importance of repair and maintenance of a powerful sand washer
With the development of society, science and technology are constantly improving. The sand washing machine equipment produced by Henan Powerful Road and Bridge Engineering Co., Ltd. has created a new atmosphere of social life. Let us understand the importance of the repair and maintenance of the sand washing machine.
The sand washing machine is composed of a transmission system, a wheel bucket, a frame and the like. When the machine is working, the motor drives the impeller to rotate slowly through the V-belt, reducer, large gear and pinion. The gravel has a feed trough into the washing tank, which is tumbling under the impeller and rubbed against each other to remove impurities covering the surface of the gravel. At the same time, the water vapor layer covering the sand particles is destroyed to facilitate dehydration. At the same time, water is added to form a strong water flow, and impurities and small foreign bodies with a small specific gravity are taken away in time. The clean sand is taken away by the blades, and finally the sand is poured from the rotating impeller into the discharge chute to complete the cleaning of the sand.
The maintenance and maintenance of the sand washing machine is very important for the life and working efficiency of the equipment:
1 After the sand washing machine is transported to the site, the user should immediately check whether the equipment is missing parts and whether the parts are damaged.
2. The user should design the foundation of the stone washing machine according to the specific conditions on site to ensure that the sand washing machine is installed stably.
3. After adjusting according to the above requirements, turn the rotor disk a few turns to check that it is a Buddha anomaly. Work can only be done if everything is normal.
Henan Powerful Mining Machinery Co., Ltd. has always been a manufacturer of spiral stone washer equipment that is committed to production quality and trustworthiness. This time, it has created a sand washing machine with absolutely advanced technology and excellent quality, which contributes to the construction work of the country. A certain ability of oneself.
This article comes from: magnetic separator: http://
Friendly recommendation:
Sand washing machine: http://
Sand washing machine: http://
More, more exciting sand washing machine information: http://NewClass-0001-1.html
The importance of repair and maintenance of a powerful sand washer
With the development of society, science and technology are constantly improving. The sand washing machine equipment produced by Henan Powerful Road and Bridge Engineering Co., Ltd. has created a new atmosphere of social life. Let us understand the importance of the repair and maintenance of the sand washing machine.
The sand washing machine is composed of a transmission system, a wheel bucket, a frame and the like. When the machine is working, the motor drives the impeller to rotate slowly through the V-belt, reducer, large gear and pinion. The gravel has a feed trough into the washing tank, which is tumbling under the impeller and rubbed against each other to remove impurities covering the surface of the gravel. At the same time, the water vapor layer covering the sand particles is destroyed to facilitate dehydration. At the same time, water is added to form a strong water flow, and impurities and small foreign bodies with a small specific gravity are taken away in time. The clean sand is taken away by the blades, and finally the sand is poured from the rotating impeller into the discharge chute to complete the cleaning of the sand.
The maintenance and maintenance of the sand washing machine is very important for the life and working efficiency of the equipment:
1 After the sand washing machine is transported to the site, the user should immediately check whether the equipment is missing parts and whether the parts are damaged.
2. The user should design the foundation of the stone washing machine according to the specific conditions on site to ensure that the sand washing machine is installed stably.
3. After adjusting according to the above requirements, turn the rotor disk a few turns to check that it is a Buddha anomaly. Work can only be done if everything is normal.
Henan Powerful Mining Machinery Co., Ltd. has always been a manufacturer of spiral stone washer equipment that is committed to production quality and trustworthiness. This time, it has created a sand washing machine with absolutely advanced technology and excellent quality, which contributes to the construction work of the country. A certain ability of oneself.
This article comes from: magnetic separator: http://
Friendly recommendation:
Sand washing machine: http://
Sand washing machine: http://
More, more exciting sand washing machine information: http://NewClass-0001-1.html
1. Compound grating is a product made of Steel Grating with certain crossing and carrying capacity and checkered plate with seal surface.
2. Compound grating will generate buckling deformation due to thermal stress after hot dip galvanizing, and larger steel grating has difficult levelling, so please note type selection.
3. Compound grating uses series 3, series 1 or series 2 steel grating as bottom plate; riffled plate commonly uses 3mm thick plate, 4mm, 5mm or 6mm plate.
|
Steel Grating Platform |
|
No. |
Item |
Description |
|
1 |
Bearing Bar |
25x3, 25x4, 25x4.5, 25x5, 30x3, 30x4, 30x4.5, 30x5, 32x5, 40x5, 50x5, 65x5, 75x6, 75x10---100x10mm etc I bar: 25x5x3, 30x5x3, 32x5x3, 40x5x3 etc US standard: 1''x3/16'', 1 1/4''x3/16'', 1 1/2''x3/16'', 1''x1/4'', 1 1/4''x1/4'', 1 1/2''x1/4'', 1''x1/8'', 1 1/4''x1/8'', 1 1/2''x1/8'' etc |
|
2 |
Bearing Bar Pitch |
12.5, 15, 20, 23.85, 25, 30, 30.16, 30.3, 32.5, 34.3, 35, 38.1, 40, 41.25, 60, 80mm etc US standard: 19-w-4, 15-w-4, 11-w-4, 19-w-2, 15-w-2 etc.
|
|
3 |
Twisted Cross Bar Pitch |
38.1, 50, 60, 76, 80, 100, 101.6, 120mm, 2'' & 4'' etc
|
|
4 |
Material Grade |
ASTM A36, A1011, A569, Q235, S275JR, SS304, SS400,Mild steel & Low carbon steel, etc
|
|
5 |
Surface Treatment |
Black, self colour, hot dip galvanized, painted, spray coating
|
|
6 |
Grating Style |
Plain / Smooth, Serrated /teeth, I bar, serrated I bar
|
|
7 |
Standard |
China: YB/T 4001.1-2007, USA: ANSI/NAAMM(MBG531-88), UK: BS4592-1987, Australia: AS1657-1985, Germany: DIN24537-1-2006, |
Advantages:
Economical/ durable/ high strength- to- weight ratio Versatile/ Low maintenance surfaces Serrated (slip resistant).
Applications:
Compound Steel Grating is widely used in the platform, corridor, bridge, well covers and stairs fencing for petroleum, chemical, power plant, waste treatment plant, civil engineering projects and environmental projects. Because of its robust design and spanning abilities, this kind of grating is extremely strong and safe for the supportive structures on decking`s mezzanine floors and elevated walkways.
Compound Steel Grating
Compound Steel Grating,Galvanized Compound Steel Grating,Compound Welded Steel Grating,Brand Compound Steel Grating
Hebei Zhenxing Jinyuan Wire Mesh Group Co.,Ltd , http://www.zxsteelgrating.com