What is an electric hybrid glue boiler (reactor)? What is the difference with ordinary glue boiler?

Electric hybrid glue boiler/reactor is a new energy-saving electricity and liquefied gas mixed construction glue coating production equipment, all water-based paint can be produced, special high efficiency, ultra energy-saving, a pot of glue only 12 degrees, by Changsha Kai Construction Electrical and Mechanical Trading Co., Ltd. is the first in China. Compared to ordinary glue boilers, it is much better than ordinary glue boilers in terms of energy saving and environmental protection.
Kaijian New Energy-saving Electric Hybrid Heating Glue Reactor (Glue Boiler)
1 cubic meter natural gas = 11 calories generated
Heating 1 ton of water from 0 to 100 degrees requires 15 cubic meters of natural gas for 1 hour, or 24 kilowatts of electricity for 7 hours.
Kaijian's new energy-saving electric hybrid electric heating construction glue boiler/electric heating glue reactor, namely the polyvinyl alcohol dissolved and reacted stainless steel container, the glue boiler adopts a cylindrical shape, its structure consists of kettle body, transmission device, stirring device, heating device, Sealing device, automatic control device composition. According to the requirements of the process formulation, the internal structure design and parameter configuration of the container are performed to more efficiently realize the heating, dissolving, and low-temperature mixing reactions of the multifunctional multi-functional comprehensive reaction vessel, and the intelligent automatic control system is used to start the water supply-heating up. Feed-dissolve-reaction-discharging can complete the set steps with high automation, strictly control the important parameters such as temperature, pressure, mechanical control (stirring) reaction concentration and other important parameters of the reaction process, ensure quality, and seek To achieve energy savings.

Polyvinyl alcohol glue boiler / reactor advantages China's first intelligent electric hybrid construction glue boiler/multi-functional polyvinyl alcohol reactor
Special high-efficiency ultra-efficient energy-saving construction glue boiler (1) The glue boiler fully absorbs the high combustion value of gas, the inertia of heat energy and the automatic control of electric energy, and integrates the chemical energy and electric energy of gas to achieve a more efficient and energy-saving device.
(2) The glue reactor can be 220v/380V dual-use 6kw multi-purpose low power.
(3) The glue boiler produces only one and a half hours, 12 kWh, and super energy.
two. Automatic control (4) The glue boiler adopts intelligent control system, one-button start, constant temperature sol, automatic stirring, leakage protection, safe and reliable.
three. Multi-purpose (5) multi-purpose polyvinyl alcohol glue boiler can do 801 putty glue reactor, can also do latex paint, waterproof, white latex, water and other water-dispersible rubber dispersion bucket, a multi-use.
four. Safe and reliable (6) The glue reactor adopts all stainless steel materials, atmospheric pressure work, no tail gas discharge, the system has a built-in thermal energy collector, adopts a new type of lightweight thermal insulation material, with a temperature resistance of 1200 degrees and thermal efficiency of 98% or more. The reactor is easy to install and does not require environmental approvals.
Fives. No environmental restrictions (7) The new energy-saving glue boiler requires only single-phase 220v power supply and is not affected by environmental conditions. Large-scale factories, small-scale home processing rooms, building materials stores, construction sites, etc. can all be installed and used, and the daily output can be varied. Eight hours of work.
six. Material (8) The reaction kettle is made of 304 stainless steel, which is resistant to acids and alkalis. It has a reasonable structure, a moderate size, durable and durable, safe, economical and portable.
Seven. Technical support is purchased once and permanently used.
We have been engaged in the production and sales of construction glue and construction glue boiler/reactor equipment for a long time. We can understand the market demand for the first time, and can provide the most suitable glue process recipe support in the market, allowing you to worry about production. At the same time can provide mature glue formula, latex paint formula, water in water, white latex, real stone paint and other 10 formula. Extend your equipment and product chain to help you grow bigger and stronger in your industry.

Steel Grating

The steel grating be welded to products . Normally, hot galvanizing will be carried out after end welding process. The range PH6 to PH12.5, a stable protective film will be formed on the zinc surface, the hot dipped galvanized steel grating has good anti-corrosive property. Of course, the steel grating also have other surface treatment, for example painted and powder coated .

Steel grating can be cutting to different kinds of shape as per your special needs.

Steel grating including flat grating, 'I' shape grating, serrated grating.

In generally , the steel grating be used as stair tread, platform, fence, trench cover, ceiling, etc.

The advantage of steel grating :

firm welding

smooth surface

high strength

steel gratingsteel gratings

Steel Grating

Steel Grating,Stainless Steel Grating,Galvanized Steel Grating,Hot Dipped Galvanized Steel Grating