Many homeowners will redesign and renovate the house because they do not like the current style of decoration. This is what we call the renovation of old houses. Renovating the old house will renovate and renovate the house windows and doors, water and electricity, and wall surfaces. Floor refurbishment, wall heavy brush and so on. Floor retreading is to polish the floor surface, putty, lacquer, and wax polish to restore the old floor to light and extend its service life. The renovation of the wall is due to the complexity of the wall surface and the heavy brushing of the wall. The house will naturally be brighter and the materials and workmanship will be different. It will be more troublesome to carry out the wall treatment. The transformation of old things a lot of trouble, specifically the transformation of existing home decoration should pay attention to? Take a look at the transformation of the old building wall, floor renovation Raiders of it.
Renovation of old houses
Renovation of old house steps/methods
1, expand the dining area, enrich the living room
This program is a major change in the redecoration of the old house. According to the overall layout of the room, the designer removes the existing wall from the living room to the bedroom, adding a dining area in this location, which makes the restaurant lack of space. Improvements, the expansion of the kitchen and dining area, also enriched the living space.
2. The partition wall between the kitchen, the foyer and the bedroom was completely destroyed, and an open kitchen was created. The space of the kitchen was expanded and the natural lighting of the kitchen was better. For the transformation of the bedroom, the use of cornices and sliding doors to distinguish the bedroom from other spaces has increased the flow of space.
3. Change the locker room to nanny room and storage room
The pattern of entering the door to the kitchen was also broken, allowing the transparent screen to replace it, with a profound and mysterious. In order to reflect the simplicity and stability of the elegant Chinese style, the color tone is based on the red color of white and Thai grapefruit. At the same time without losing the contrast, dotted green, blue in a small area. Lighting is critical in the layout of partitioned furniture. When partitioned, appropriate lighting is added to the dark areas to solve local lighting problems.
4. Get through the partition walls of the living room and dining room
Allowing the homeowner to live comfortably and comfortably in the space is the first consideration before the renovation. Space comfort standards are the optimization and integration of the functions and forms of space. Most of the old buildings are traditional brick-concrete structures, rather than the now common frame structure, so when the changes are made, the original structure cannot be destroyed at will. The overall transformation of this old house is generous and comfortable, and the style is unified. It is particularly worth mentioning that it opened up the partition between the original living room and the dining room, virtually expanding the living room and dining room, transparent and open, through clever design, and It does not feel oppressive, and it is filled with homely feelings and natural harmony.
5, the production of local ceiling "increase" height
Relatively mature new homes, there are too many irrational places. If the height of the floor is insufficient, it can be changed by using local wall tops and lighting. For example, a dining room can be wall-to-top, with a color wall that extends from the top to the same width as the dining table or less than the size of the dining table. A partial top can appear. Three downlights can be embedded, controlled by a dimmer switch, or a single piece of paper can be used. Quality or aluminum single chandelier, which is more suitable for two people's world. The layout of the living room is as simple as possible, and the old furniture can be used without it, picking up a few pieces of furniture that are simple and clear and that contain strong functions.
Renovation of old house floor renovation
Floor renovation steps
1. Use a large-scale floor retreading machine to remove the lacquer layer, surface layer, and wood layer by about 0.5 mm several times, and then carefully sand the surface of the floor to make it smooth and smooth. The corners of the floor are polished using a small angle grinder for overall smoothing.
2. Remove the original side seam transparent putty, re-sealing the seam, and then seal the entire floor with a primer and wait until dry.
3. After the primer is dry, brush the paint over and over again until it is dry.
4, carefully grinding with water sandpaper, the surface layer to a little rough, remove the powder.
5, according to the above procedure to brush three to four times the topcoat, do not have to grind the last time.
6, until the last time the paint is dry and can be marked with floor wax.
Floor renovation considerations
Many owners think that the partial renovation and replacement of the floor will save some money, but in fact this method does not work. The overall refurbishment of the floor of a room is better. It can basically achieve the effect of a new floor, but the partial renovation will result in the difference between the floor and the floor. The longer the service life of the floor, the more obvious the difference between the old and the new.
The refurbishment of old premises tiles can also be divided into two cases. One is to eliminate the original floor tiles, and the other is to spread new floor tiles directly on the surface of the old floor tiles. In addition, the refurbished floor tiles should pay attention to the ground level and raised floor height. Precautions for the renovation of floor tiles: When smashing wall tiles and floor tiles, avoid crushing the sewers by means of debris; handle waterproofing, and minimize the use of elbows in the waterways to avoid poor flow or blockage. Minimize the use of wood panels, most wood products contain formaldehyde, affect health.
Note the height difference: The original house was paved with the living room floor and the bedroom floor. The cement mortar used to tile the floor raised the floor so that there was a gap of 2 cm to 3 cm between the bedroom and the living room. In order to change this situation in the renovation of the old house, it is necessary to level the bed before the wooden floor in the bedroom.
Pay attention to the ground circuit: When the old house is renovated and renovated, many households will carry out partial circuit modification due to reasons such as adding sockets or changing the function of the room. The wires usually pass through the ground, and the state requires that the ground is not allowed to be cut, which requires padding on the ground. High, leveling, burying the pipeline on the ground with a screed, and then laying the floor.
Floor refurbishment is a very important project in the transformation of old houses, so if you can save a lot of money from this project, it is also quite good.
Renovation of old house wall renovation
1, grassroots processing
For the walls of old houses, due to prolonged use, there will be various wall problems, such as the phenomenon of wall flouring. This is mainly due to the fact that no primer or brushing is used for the wall surface construction. Too thin, in which case the grassroots processing is needed. For the basement of the old room wall, we need to decide the method of base treatment according to its different wall conditions. For the general powdered ordinary house wall surface, the original house surface can be removed, mainly by water. After being wetted, it is shoveled out with a blade to restore the original appearance of the wall. For houses with severe chalkiness, the paint on the surface has been severely detached. It is necessary to remove the lacquer layer and the entire batch of scalding until the cement has been burned or the bricks have been found, and subsequent processing such as painting of latex paint is performed.
2, brush latex paint
For the treatment of old house walls, the most common method is to apply latex paint. Latex paint can not only repair the problems of cracking and pulverization of the wall surface, but also can decorate the wall surface and increase the aesthetic appearance of the wall surface. . After the general resident purchases the second-hand house, he will modify the decoration in the house. For the wall, he will paint the latex paint. After the surface of the wall is treated, the occupant shall use the putty to polish and paint the latex paint. At this time, Xiao Bian would like to remind tenants that the quality of latex paint needs to be strictly checked when applying latex paint on such old house walls to avoid environmental pollution in the house.
3, wallpaper
Paving the wallpaper is also a very common method of wall decoration. Because of the good decorative effect of the wallpaper, the performance is also comprehensive with the progress of the wallpaper making process, especially the now easy-to-clean wallpapers for the households with children in the family. It is very convenient. For old wallpapers, we need to pay attention to the anti-mildew treatment of the old walls during construction. After processing the wall base layer, the hot powder and the cooked rubber powder can be used for the batch hot leveling. After it is dry, apply a varnish one or two times and post it again.
4, tiling
Tiles are also wall decoration materials, but due to their material problems, they are generally used in areas such as kitchens, bathrooms, and balconies. Therefore, if these are places for old houses, then Xiao Bian recommends laying tiles. To tile tiles in these areas of an old house requires attention to a problem: waterproof performance. Because these areas, especially the bathroom wall base treatment, will be more or less damaged to the original waterproof layer, so you need to do a test on the waterproof performance of the wall before paving tiles to prevent water seepage Case.
Wall renovation should pay attention to 5 points
1, the wall to clean up
Before the renovation, the old wall surface must be treated with a wall surface base. All the powders must be thoroughly removed, and the white cement should be removed after eradication. The original wall was too smooth, and after brushing off the paint, it was polished and the loosely bonded skin was removed to facilitate the adhesion of the new paint and the wall.
2, the primer can not be less
The role of the wall primer is to resist alkali moisture, to seal the substrate, to protect the topcoat, and to improve the texture and hiding power of the topcoat. For the renovation of old houses, the walls must be painted with primer. If the paint is applied directly on the walls, the walls will tend to foam and mold in the future, and the sun will take a long time to discolor.
3, repair should be comprehensive
For the repair of painted walls, it is relatively difficult to achieve the desired results. Therefore, it is best to repair the wall surface by repairing the whole wall surface or selecting a larger area for repair as much as possible. In this way, the color difference can be avoided as much as possible, and the quality after repairing is also better.
4, repair color
Color differences occur on walls, which is avoided when repairing walls. To this end, it should be noted that according to the description of the paint bucket, brushing, it is best to estimate the amount of good. It is important to prepare a sufficient amount at a time so that the color of the wall can be guaranteed. Although the paint factory provided color cards, due to the strong alkalinity of the old walls, the effect may be biased.
5, pay attention to ventilation
The ventilated condition of the old house is poor, and the xylene component of the diluent chemically reacts with the components of the latex paint, resulting in yellowing of the walls. Therefore, it is not enough to strengthen ventilation, and several electric fans have to be placed to enhance ventilation.
Summary: The relevant information on the transformation of old houses was introduced here for everyone. I hope this article will be helpful to everyone. If you still have something you don't understand, you can leave a message to Xiaobian at the bottom. We will answer your questions as soon as possible.
Second-hand housing renovation
High Impact Polystyrene Sheet,Extruded Polystyrene Sheets,High Density Polystyrene Sheets,Ps Foam Sheet
Heshan Liantuo Engineering Plastic Co.,Ltd , https://www.liantuoplastic.com