Led display splicer brings you a refreshing feeling

Led display splicer With the rapid development of the industry in the indoor theater, party stage, the command system and other fields are widely used, and led display splicer point spacing is getting smaller and smaller, the screen to the development of high-definition direction. This is very easy to lead indoor led display splicer pixel points can easily exceed the carrying capacity of a LED sending card.

In order to be able to drive larger LED screens, there are two common practices in the industry: First, use a cascade of transmit cards to complete the project. For this method, the tape carrying area of ​​the sending card cascade can only be limited to the maximum output range of a single led display splicer. Second, use the splicer to complete the project. For this approach, most people will feel the cost is too high, the operation is complicated, because the current splicer is mainly designed for the splicing market of led display splicer, if used in the splicing project of LED full-color display, regardless of price Or the features are not matched.

In view of the above two design restrictions, is there a solution with low cost effectiveness and no load-bearing area? The following led display brand manufacturers will introduce another program: through the led display splicer for indoor large led display stitching. As a part of the LED display system , the function of the led display splicer is to convert different types of signal sources into video formats that can be accepted by the led large screen. And led display splicer built-in multi-screen splicing function, it can be used alone, driving a single led display, but also can be used in combination, it will carry the led display, as the entire large led display In part, some of the screens are displayed.

Currently on the market led display splicer also has a splicing function, but the function is simple, the operation is complex, and the effect is not very good. The main reasons are as follows: 1. It is not convenient to calculate the stitching seam of each part of the LED screen; 2. After successfully calculating the stitching seam, the still image display is normal, but when facing the animation, the stitching seam position will appear The phenomenon of fragmentation affects the overall sense of the picture.

The LED video processor provides two kinds of splicing methods, namely "divided splicing" and "equal splicing". These two kinds of function parameters are very simple, easy to operate, can intelligently cut and combine the image signals according to the needs of the user, and ensure seamless connection between the screen and the screen, and each frame of the video signal is completely synchronized.

The function of led display splicer is applicable to the application environment where the horizontal and vertical points of the led display splicer carried by each video processor are exactly the same; the "unequal splicing" function is applicable to each video processor. The ledled display splicer does not have the same horizontal and vertical point application environment.