No matter what kind of floor, suspension installation method: well-known. Even if the rails are left expansion joints. If the floor and floor are firmly nailed to death, affected by the climate, the floor and floor materials are different, the coefficient of retraction must be different, and cracking and deformation will occur. Bamboo flooring adopts scientific suspension installation method, which is in line with the physical characteristics of bamboo flooring. It takes full account of the expansion factors of cement floor and bamboo floor, and uses bamboo flooring to spliced ​​together on four sides, and does not bond to the ground. Certain expansion joints (safety joints) are covered with the foot above, adhere to the overall appearance of the floor, and give the bamboo floor space to shrink, the bamboo floor will not bend. Using suspension installation method, no need to fight dragon skeletons, do not lay flat panels, do not glue, do not hit nails, do not sand, do not paint (each bamboo floor has been sealed with imported UV paint on all sides, the appearance has been formed Sturdy wear-resistant layer) saves time, labor, material, and money (Paving costs only one-third of the wood floor paving costs) Disassembly, preparation before installation 1 leveling the ground, with grout Smooth and dry. 2 Use asphalt to paint the ground 12 to enlighten and dry it. 3 Use 3mm thick foam board with plastic sheet to lay the floor. It is required to be flat, non-overlapping and non-crease. 4 ready to use 1.21.2cm fir bar number. Second, install a good amount of bamboo flooring size, reasonable materials. All cut-off plates must be sealed with varnish to prevent moisture. 2 When laying bamboo flooring, put fir sticks (1.21.2cm) at the roots of the surrounding walls and begin to lay the first piece vertically.
Nature floor del floor paint cement space
Copper Coupling,Copper Connectors,Copper Plumbing
Jiekelong Precision Manufacturing Co., Ltd. , http://www.nbcoupling.com