1. There is no shortage of cabinets in the kitchen . The cabinets are used for storage. Some debris can be placed in the cabinets. Some people will divide the cabinets in order to increase the storage space. In fact, the cabinets are separated. The layer is not practical at all, but the storage space has been reduced a lot, and many things can not be put down.
2. Most people think that when installing the range hood, the cabinet should be installed first, and the cabinet can only be installed after the cabinet is installed. If so, the follow-up will be troublesome because the installation of the range hood The process is relatively complicated, and there will be gaps between the cabinets , so when decorating, the best way is to install the cabinet and the range hood at the same time.
3. There will be a strip in every edge-sealing area of ​​the cabinet. Everyone needs to pay attention that this strip cannot be bought together with the board surface, because many merchants on the market will create supporting statements to sell. And the selling price is very expensive.
4. There are a lot of electrical appliances in the kitchen. When it comes to large appliances, the first thing that comes to mind is the refrigerator. However, during the decoration process, many people will forget to measure the size of the refrigerator and always think that the refrigerator looks good. I bought it, but after I bought it back, I found that the reserved refrigerator position did not match the size of the refrigerator itself, and it would look particularly ugly if it was processed later.
5. Countertop design is naturally not to be forgotten. Because of the lack of comprehensive consideration during the decoration, the installation of the countertop was eventually not smooth. Even the installation of an under counter basin appeared, the countertop was relatively narrow, but the basin was relatively large In this case, even the decoration workers said that there was no way to install it.
6. The faucet used in the kitchen must be bought with a switch on the back of the hand, because you need to know that the faucet is not very resistant to dirt, especially the kind of faucet that is turned on and off with fingers. , It's hard to turn
1.Adopt quality ABS resin raw material, imported UV and ink. 2. ABS Wood Grain Edge Banding have matt+high gloss+emboss finish surface. 3.Customize size and color-more than 2000 Wood Color Edge Banding be produced.Size range 0.35-3.0mm thick and 12-620mm width. Above 98% matching to customer`s standard panel. 4.Eleven years ABS Edge Banding manufacture experience. 5.Strict quality control system and well after-sales service are promised:strict test during every step of ABS edge banding produce. 6.Won high praise from cooperated customers 7. We promise to only offer high quality edge banding.
ABS Edge Banding Series
ABS Edge Banding, Newest design ABS Edge Banding, ABS Furniture Edge Banding, China ABS Woodgrain Edge Banding Manufacturer, ABS edge banding factory, High gloss ABS edge banding
Sinowolf Plastic Dekor Co., Ltd , http://www.sinowolfdekor.com