As I have repeatedly said before, the appearance of the fine stone concrete pump has solved some problems in the floor heating construction. Therefore, it has also been trusted by many construction customers, but there are still some customers who have doubts about where the fine stone concrete pump manufacturers have it. If you have any questions about whether the fine stone concrete pump is easy to use, you can go to the previous article of the editor, which mentioned the related performance and advantages of the fine stone concrete pump. Where are the manufacturers of concrete pumps on the ground floor of Anhui?
Fine stone concrete pump construction site
Luke Heavy Duty is an excellent and experienced Anhui floor ground fine stone concrete pump manufacturer. The fine stone concrete pump produced is easy to use, which is very convenient for the construction of floor ground and basement. I believe some people will say that this is not the wife selling melons and bragging. To Luke Heavy Industry-seeing the site construction drawings used by some customers and the evaluations given is a good answer and proof. Anhui floor fine stone concrete pump manufacturers remind customers that friends want fine stone concrete pumps to be easy to use and do the right cleaning work.
1. The daily cleaning work:
1. The fine stone concrete pump manufacturer reminds the customer that after the fine stone concrete pump is completed every day, removing the remaining concrete material is the first step. The displacement of the main oil pump should be adjusted down, and the empty machine should be operated for 3 or 4 strokes. After stopping this work.
2. On the basis of the above, after removing the spinal canal, use a shovel to clean the remaining material of the hopper and the pipe valve, and rinse with water to ensure that there is no remaining concrete material. After washing with water, lubricate with lubricant for about 20 minutes to turn off the power.
2. Necessary cleaning work before entering the warehouse: If the concrete pump is not used for construction within a certain period of time, it must be cleaned and put into the warehouse. It is the recommendation of fine stone concrete pump manufacturers to each customer.
1. First, the fine stone concrete pump is cleaned according to the daily cleaning method, and then the piston in it is pulled back to put the water in the water tank clean.
2. After the piston is pulled back, it must be removed and cleaned. After being dried, it is lubricated with grease and reinstalled in the pump. Another important step is to ensure that the appearance of the fine stone concrete pump is cleaned and dried. After there is no concrete block and muddy water, spray the machine oil to ensure that it will not be corroded. After doing the above work, the fine stone concrete can be pumped into the warehouse.
Fine stone concrete pump construction site
Luke Heavy Industry, an Anhui floor ground fine concrete pump manufacturer, has its own set of plans for equipment maintenance, which will be shared with you later. Fine stone concrete pump equipment is easy to install and operate, with a pouring speed of 40 cubic meters per hour. The company provides customers with free installation, commissioning and technical training services. Anhui floor floor fine stone concrete pump manufacturer, Luke Heavy Industry will let you rest assured.
================================================== ================================================== ======
Quality series
Ningbo Mywin Caster Co., Ltd. , https://www.mywin-caster.com